Atlas Copco CC 1700 U - Page 60

S version, cutter jaw (single)
10
60
3
5
(42,5)
1
2
A
B
C
D
A. Hard facing CN 13/4-IG
B. The hard facing must not protrude
C. Hard facing CN 13/4-IG
D. Hard facing CN 13/4-IG
♦
Fit the cutter blades (see chapter Turning or
changing the cutter blades).
♦
Fit the tips of the tooth (see chapter Changing the
tip of the tooth).
♦
Fit the cutter jaws (see chapter Changing the
cutter jaw pair).
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
60
CC 1700 U, 1700 SREPAIR