Atlas Copco ETP SRB81-1300-20-HA-D - Troubleshooting Guide; Overheated Tool Diagnosis

ETP SRB81-1300-20-HA-D EN Troubleshooting
© Atlas Copco Industrial Technique AB - 9839 1649 01
21
Troubleshooting
Overheated tool
The tool can handle any normal line jobs that an operator sustains with the proper adjustments. The tool
temperature can be influenced by the following parameters:
■
torque above rated
■
too low speed
■
very high prevailing torque
■
very soft joints
■
short cycle time