ETP SRB81-1300-20-HA-D EN Installation
© Atlas Copco Industrial Technique AB - 9839 1649 01
5
Installation
Installation Requirements
Installation
For installation guidelines refer to Power Focus 6000 manual.
The torque adjustment factor is stored in non-volatile memory in the tool. Any changes made to the
torque adjustment factor in the Power Focus 6000 will update the stored value in the tool.
Model Battery
8433250601 4211603085, 36V
Installation
For installation guideline, see Power Focus 6000 Configuration manual.
Installation Instructions
Battery Pack
Attaching and Removing the Battery Pack
1. Attach the battery pack to the tool and make sure that it is fastened correctly. The battery pack can
be attached pointing forward or backward to get the best accessibility and balance.
2. To remove the battery pack, press the button on the battery and push it out.
Since a battery pack slowly discharge itself, keep the battery pack in the charging unit that provides a
trickle charge.
To Next Page
Loading...
