Atlas Copco ETP TBP81-55-10 - Re-assembling Pulse Unit; Repair Instructions; Spare Parts Replacement

Service EN ETP TBP81-55-10
22
© Atlas Copco Industrial Technique AB - 9839 0853 01
Re-assembling the Pulse unit
When re-assembling the Pulse unit, it is important to tighten it accordingly.
Model Tightening torque Nm (A) Tool (A)
ETP TBP/TBP-S 6 40 4080 1476 00
ETP TBP/TBP-S 8 50 4080 0891 00
ETP TBP/TBP-S 9 50 4080 1474 00
ETP TBP/TBP-S 13 50 4080 1474 00
Repair Instructions
Spare Parts Replacement
When replacing certain electric parts of the tool, the tool designation and parameters are erased from
ToolsTalk Service 2 and need to be set again. For more information, see ToolsTalk Service 2 User Edition
user guide.