Atlas Copco ETP TBP81-55-10 - Page 29

ETP TBP81-55-10 EN Recycling
© Atlas Copco Industrial Technique AB - 9839 0853 01
29
Pos. Part Remarks Recycle as
1 Front cover Metal, aluminum
2 Bearing Metal, steel
3 Pulse unit Metal, steel
4 Front light Electronics
5 Motor housing, complete Electronics
6 Main board support rub-
ber
Rubber, PUR
7 GND strip RH Metal, brass
8 Handle, right Plastic, other, PA
9 Screws 8 pcs Metal, steel
10 Back end cover Plastic, other, PA
11 Screws 4 pcs Metal, steel
12 Radio module Electronics
13 Main board module Plastic, other, PA
14 Main board support rub-
ber
Rubber, PUR
15 GND strip LH Metal, brass
16 Reverse button Metal, neodymium
17 Handle, left Plastic, other, PA
18 Screw Metal, steel
19 Screw 4 pcs, to the antennas Metal, steel
20 Antennas Electronics
21 Battery holder Metal, aluminum
22 Backup battery Battery, Li-ion
23 Power module Electronics
24 Screws 4 pcs to the power module Metal, steel