Need help?Do you have a question about the Atlas Copco GA 15 VSD+ and is the answer not in the manual?
General| Model | GA 15 VSD+ |
|---|---|
| Type | Rotary Screw Compressor |
| Power Output | 15 kW |
| Max Pressure | 13 bar |
| Drive Type | Direct Drive |
Explains icons used for safety warnings.
General safety practices for operators and personnel.
Safety measures during compressor installation.
Essential safety rules while the compressor is running.
Critical safety guidelines for maintenance and repair tasks.
Introduces GA 7-15 VSD+ compressors and their features.
Illustrates the operational flow of the compressor system.
Explains the system for removing condensate from compressed air.
Describes how the compressor regulates speed and operation.
Outlines the electrical components of the compressor.
Details the air dryer system and its operation.
Introduces controller functions and operation.
Describes the physical control panel and its parts.
Explains the meaning of controller display icons.
Details the primary display screen and its views.
Guides on navigating and accessing controller menus.
Explains how to view measured data and input statuses.
Describes how to check the status of various outputs.
Details accessing and viewing operational counters and statistics.
Explains selection of local, remote, or network control modes.
Guides on accessing service plans, history, and intervals.
Explains how to adjust operating pressure setpoints.
Describes how to view last shutdowns and emergency stop data.
Guides on changing settings like language, date, and format.
Explains how to find the Atlas Copco internet address.
Details programming time-based start/stop and change-over commands.
Explains how to perform display and LED tests.
Describes using password protection to secure settings.
Explains connecting to the compressor via a web server.
Lists parameters programmable for compressor operation.
Provides physical dimensions and weight specs for compressors.
Offers guidance for compressor room installation.
Details electrical wiring and connection requirements.
Explains pictograms for safety and operation.
Describes the energy recovery system and its components.
Details the optional build-in main switch.
Guides through the steps for the initial compressor start-up.
Explains the procedure for safely stopping the compressor.
Details steps for safely removing the compressor from operation.
Outlines the schedule for routine preventive maintenance tasks.
Provides details on recommended lubricants and their properties.
Covers bearing maintenance for the drive motor.
Details the procedure for replacing the air filter element.
Describes changing oil, filter, and separator.
Provides instructions for cleaning and maintaining coolers.
Outlines safety and maintenance for the refrigerant dryer.
Covers safety valve testing and warnings.
Specifies service intervals for DD/PD filters.
Information on available service kits for overhauling and maintenance.
Guidelines for storing the compressor after installation.
Instructions for environmentally friendly disposal of used parts.
Lists common faults, causes, and remedies for the compressor.
Details information displayed on the Elektronikon controller.
Specifies required cable sizes and fuse ratings for connections.
Lists operating conditions and parameter limits for the compressor.
Provides detailed specs for various compressor models.
Lists technical specifications for the controller unit.
Usage instructions and safety warnings for the air/oil separator vessel.
General guidance on inspection requirements and standards.
Lists components and their compliance with pressure equipment directives.
Manufacturer's declaration of conformity to relevant directives.
To Next Page