ϲ
1904 0504 83
4 5 6 7 8 9 8 : ; < 9
Danger for life
Warning
Important note
= >
9
> ?
8 7 6
? > @
8 A : ; < 9 B
C D
To be read attentively and acted accordingly before installing, operating, repairing or
decommissioning the unit
E D
These recommendations apply to machinery processing or consuming air or insert gas.
F D
Processing of any other gas requires additional safety precautions typical to the application,
which are not included herein.
G D
In addition to normal safety rules, which should be observed with stationary air compressor and
equipment, the following safety directions and precautions are of special importance.
H
D
Any modification on the compressor shall only be performed in agreement with Atlas copco and
under stricter of the two shall apply
I D
The operator must employ safe working practices and observe all related work safety
requirements and regulations.
J
D
If any of the following statements does not comply with the applicable legislation, the stricter of
the two shall apply.
K D
Installation, operation, maintenance and repair work must only be performed by authorized,
trained, specialized personnel.
L D
The compressor is not considered capable of producing air of breathing quality. For air of
breathing quality, the compressed air must be adequately purified according to the applicable
legislation and standards.
C M D
Before any maintenance, repair work, adjustment or any other non-routine checks:
• Stop the compressor.
• Press the emergency stop button.
• Switch off the voltage.
• Depressurize the compressor.
• Lock Out – Tag Out (LOTO):
- Open the power isolating switch and lock it with a personal lock.
- Tag the power isolating switch with the name of the service technician.
• On units are powered by a frequency converter, wait 10 minutes before starting any
electrical repair.
• Never rely on indicator lamps or electrical door locks before maintenance work, always
disconnect and check with measuring device.
C C D
The units are powered by a frequency converter, wait 10 minutes before starting any electrical
repair.