Need help?Do you have a question about the Atlas Copco GA 45 VSD and is the answer not in the manual?
General| Model | GA 45 VSD |
|---|---|
| Type | Rotary Screw Compressor |
| Power Output | 45 kW |
| Pressure Range | 7.5 - 13 bar |
| Voltage | 400 V |
| Frequency | 50/60 Hz |
| Drive type | Variable Speed Drive |
Outlines fundamental safety rules for operating, maintaining, and installing the unit.
Details safety measures to be followed specifically during the installation process.
Provides critical safety guidelines for operating the compressor safely and correctly.
Lists essential safety steps before performing any maintenance or repair work.
Guides users on how to manage service plans, check history, and modify intervals.
Explains how to adjust and set operational parameters like pressure setpoints.
Details the electrical connection requirements and diagrams for safe installation.
Lists safety checks and preparations required before the first start-up.
Outlines the steps to take before starting the compressor, including checks and procedures.
Provides a step-by-step guide on how to start the compressor correctly.
Explains how to monitor the compressor's operation and important parameters.
Details the procedure for stopping the compressor, including emergency stops.
Provides instructions for safely taking the compressor out of operation for storage or extended periods.
Outlines the recommended schedule for routine maintenance tasks and intervals.
Lists the types of lubricants recommended for the compressor and their properties.
Explains the procedure for checking, replacing, and resetting the air filter.
Provides detailed steps for changing the compressor oil and oil filter.
Lists common compressor faults, their possible causes, and recommended remedies.
To Next Page