ϭϭϲ
1904 0504 83
Roto-Xtend duty fluid is used as “General purpose lubricant” for GA/GR type compressors.
The indicated oil exchange intervals are valid for standard operating conditions (see section
Reference
conditions and limitations
) and nominal operating pressure (see section Compressor data). Exposure of
the compressor to external pollutants, operation at high humidity combined with low duty cycles or
operation at higher temperatures may require a shorter oil exchange interval. Contact Atlas Copco if in
doubt.
ì í ë î
ò
Always consult Atlas Copco if a timer setting has to be changed
.
For the change interval of oil and oil filter in extreme conditions of
temperature, humidity or cooling air, consult your Atlas Copco Customer
Centre.
Any leakage should be attended to immediately. Damaged hoses or
flexible joints must be replaced.
Never mix lubricants of different brands or types as they may not be
compatible and the oil mix will have inferior properties. A label, indicating
the type of oil filled ex-factory, stuck on the air receiver/oil tank.
Always drain the compressor oil at all drain points. Used oil left in the
compressor can contaminate the oil system and can shorten the lifetime of
the new oil.
It is strongly recommended to use genuine Atlas Copco Lubricants. They are the result of years of field
experience and research in our labs. See section
Preventive maintenance schedule for replacement
intervals and section
Service Kits for part number information.
ë
ë
ï ÿ
k
ó
Atlas Copco's Roto-Inject Fluid is a specially developed lubricant for use in single stage oil-injected
screw compressors. Its specific composition keeps the compressor in excellent condition. Roto-Inject
Fluid can be used for compressors operating at ambient temperatures between 0 °C and 40 °C. If
the compressor is regularly operating in ambient temperatures between 40 °C and 46 °C , oil lifetime
is reduced significantly. In such case it is recommended to use Roto-Xtend Duty Fluid.
ë
ë
¡
ï
þ
k
ó
Atlas Copco's Roto-Xtend Duty Fluid is a high-quality synthetic lubricant for oil-injected screw
compressors which keeps the compressor in excellent condition. Because of its excellent oxidation
stability, Roto-Xtend Duty Fluid can be used for compressors operating at ambient temperatures
between 0 °C and 46 °C.
Roto-Xtend Duty Fluid is the standard oil for compressors equipped with freeze protection.
ë
ë
k
ë ë
î ò
ï
k
ó
í ï ÿ
ò ó ë
ó
l
ï ó
ï î ï
ò ð ò
ë í
ë
o
Atlas Copco's Roto-Foodgrade fluid is a unique high-quality synthetic lubricant, specially created for
oil- injected screw compressors that provide air for the food industry. This lubricant keeps the compressor
inexcellent condition. Roto-Foodgrade Fluid can be used for compressors operating at ambient
temperatures between 0°C and 40 °C .
To Next Page
Loading...
