ϲϬ
1904 0504 83
¨
>
9 A ;
@
< 9
d
k
> > _
: ; S
> ?
A 9
@
: ; < 9
• To program time-based start/stop commands for the compressor
• To program time-based change-over commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week
in the cycle, one of the four programmed week schemes can be chosen.
In the Elektronikon you can select different timers on one day.(up to 8 actions). It
is however not possible to program 2 actions at the same time. The solution:
leave at least 1 minute in between 2 actions.
Example: Start Compressor: 5.00 AM, Pressure Setpoint 2: 5.01 AM (or later).
N
?
<
@ >
O A
? >
Starting from the Main screen (see Main screen),
• Move the cursor to the action button Menu and press the Enter key. Use the Scroll buttons
to select the Timer icon.
Text on figure
(1) Menu
(2) Week Timer
• Press the Enter key on the controller. Following screen appears:
To Next Page
Loading...
