Atlas Copco GA 45 VSD - Page 69

Instruction book



1904 0504 83 ϲϳ

(1) Week Timer
(2) Week
(3) Week Timer Inactive
(4) Week 1
• Press the Escape key on the controller to leave this window. The status shows that week 1 is
active.
(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• Press the Escape key on the controller to go to the main Week Timer menu. Select
Remaining Running Time from the list and press the Enter key on the controller to Modify.