Atlas Copco GA 45 VSD - Page 71

Instruction book



1904 0504 83 ϲϵ

or

A 9
@
: ; < 9
• To carry out a display test, i.e. to check whether the display and LEDs are still intact.
N
?
<
@ >
O A
? >
Starting from the Main screen,
• Move the cursor to the action button Menu and press the enter key (2), following screen appears:
• Using the scroll keys (1), move the cursor to the test icon (see above, section Menu icon)
• Press the enter key (2), following screen appears:
• The safety valve test can only be performed by authorized personnel and is protected by a
security code.
• Select the item display test and press the enter key. A screen is shown to inspect the display,
at the same time all LED's are lit.