Instruction book
28 6996 0227 40
• To go to the Menu screen, select Menu, using the Scroll keys
• Press the Enter key to select the menu. Following screen appears:
• The screen shows a number of icons. Each icon indicates a menu item. By default, the Pressure
Settings (Regulation) icon is selected. The status bar shows the name of the menu that corresponds with
the selected icon.
• Use the Scroll keys to select an icon.
• Press the Escape key to return to the Main screen.
3.6 Inputs menu
Control panel
Menu icon, inputs
Function
• To display the actual value of the measured data (analog inputs) and the status of the digital inputs (e.g.
emergency stop contact, motor overload relay, etc.).
• To select the digital input to be shown on the chart in the main screen.
To Next Page
Loading...
