Atlas Copco GHS 350 VSD+ - Control Mode Selection

Instruction book
34 6996 0227 40
Text on figures
(i)
Menu
(ii)
Regulation
 Using the scroll keys, move the cursor to the counters icon (see above, section Menu icon)
 Press the enter key, following screen appears:
Text on figures
(i)
Counters
(ii)
Running hours
(iii)
Motor starts
(iv)
Load relay
(v)
VSD 1-20 % rpm in % (the percentage of the time during which the motor speed was between 1
and 20 %)
• The screen shows a list of all counters with their actual readings.
3.9 Control mode selection
Control panel
(1)
Scroll keys
(2)
Enter key
(3)
Escape key