Instruction book
38 6996 0227 40
After carrying out the service actions related to the indicated levels, the timers must be reset.
From the Service menu above, select Service plan (3) and press Enter. Following screen appears:
Text on figures
Modifying a service plan
Dependant on the operating conditions, it can be necessary to modify the service intervals. (By default the
service plan in Electronikon controller is for normal application and needs to be changed when running in
medium or harsh applications). To do so, use the Scroll keys to select the value to be modified. A screen
similar to the one below appears:
Press the Enter key. Following screen appears:
Modify the value as required using theor scroll key and press the Enter key to confirm.
Note: Running hours can be modified in steps of 100 hours, real time hours can be modified in steps of 1
hour.
To Next Page
Loading...
