Atlas Copco LH 11 - Page 17

17
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB | No. 3392 5143 01 | 2008-02-29
Overhauling instructions
6. Hammer out the left and right latch pin with a
punch. Remove and replace the trigger pawl
if necessary
7. Remove the four springs
8. Hammer out the two roll pins (with a punch)
across from each other
9. Remove the bottom plate
10. Remove the handle rod