34
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
Adjustment of E-handle
1. Mount the handle on the breaker
2. Activate the trigger lever
3. Adjust the trigger pawl to a clearance of
1-2 mm. The sliding surface should align with
the breaker to keep the trigger from pulsating
To Next Page
Loading...
