- 35 -
Maintenance schedule Daily
50 km
after initial
start-up
Every 500 km
Every
1000 km
Yearly
Check tyre pressure xxxx
Check tyres for uneven wear x
Check torque of wheel nuts xxx
Check coupling head x x x
Check height of adjusting facility x x
Check towbar handbrake lever spring actuator, reversing lever, linkage and
all movable parts for ease of movement
xx x xx
Grease coupling head, towbar bearings at the housing of the overrun brake x x x
Check brake system (if installed) and adjust if necessary x x x
Oil or grease brake lever and moving parts such as bolts and joints x x x
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection device for damage x x
Lubricate torsion bar axle trailing arm xx
Check brake lining wear x
Change wheel hub bearing grease x
Check/Adjust lateral play of wheel bearing (conventional bearing) x x x
Check hub cap for firm seating xx
To Next Page
Loading...
