EasyManua.ls Logo

Atlas Copco QES 40-50 Kd S2/S3A ESF - Page 36

Atlas Copco QES 40-50 Kd S2/S3A ESF
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 36 -
Notes:
In highly dusty environments, these service intervals
do not apply. Check and/or replace filters and clean
radiator on a regular basis.
TBA* = to be announced
(1) More frequently when operating in a dusty
environment.
(2) Refer to engine operation manual.
(3) After a days work.
(4) Yearly is only valid when using PARCOOL.
Change coolant every 5 years.
(5) Gummed or clogged filters means fuel starvation
and reduced engine performance. Reduce service
interval in heavy duty application.
(6) See chapter “Engine oil specifications”.
(7) The following part numbers can be ordered from
Atlas Copco to check on inhibitors and freezing
points:
2913 0028 00: refractometer
2913 0029 00: pH meter
(8) See chapter “Before starting”.
(9) Replace all rubber flexibles every 5 years,
according to DIN20066.
(10)See chapter “Battery care”.
(11)See chapter “Measuring the alternator insulation
resistance”.
(12)The function of this protection should be tested
minimum on every new installation.
(13)Water in fuel tank can be detected by means of
2914 8700 00. Drain fuel tank when water is
detected.

Table of Contents

Related product manuals