RE Qualifier System Manual 2
Step 7:
Once the MORE OPTIONS screen
is in view, press ‘1’ on the keypad
in order to EDIT THE PARAME-
TER.
Step 8:
Select the current parameter by
pressing the number on the key-
pad adjacent to the desired param-
eter.
Step 9:
Press the ‘8’ key in order to edit
the number of fasteners in a batch.
Step 10:
Enter the desired number for the
batch setting. When complete hit
ENT.
Step 11:
When the EDIT PARAMETER
screen re-appears, press the
LOCK AND RETURN soft-key.
Step 12:
The unit will return to the MAIN
screen and be locked. Run several
fasteners to ensure that the unit is
working properly.
To Next Page
Loading...
