Atlas Copco SDS User Manual

SDS
Printed Matter No. 9836 7942 00 Screw dispenser
2012-06-01
Product Instructions
SDS 8432 0830 00
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and in-
structions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference

Atlas Copco SDS Specifications

General

Brand	Atlas Copco
Model	SDS
Category	Dispenser
Language	English

Summary

Safety and Operating Instructions

Technical Data

Ergonomic Guidelines

Country of Origin

Spare Parts

Warranty Information

ServAid Utility

Safety Data Sheets (MSDS/SDS)

Installation

General Installation

General guidelines and initial measurements for setting up the screw feeder.

Adjust the Rail

Step-by-step instructions for adjusting the rail using specific screws and shims.

Additional Adjustments

Overload Alarm

Allows switching the overload indicator alarm on or off.

Vibrator (Vibration Timer)

Determines vibration time after a screw reaches the pick-up point.

Roller (Drum Timer)

Sets time for drum to feed screws into the rail.

Swing Strength (Vibration Intensity)

Controls the intensity of the feeder's vibration.

Recommended Screw Capacities

Guidelines for fill levels to prevent overloading based on screw length.

Operation

Handling Screws

Instructions on feeding screws into the feeder and operating the unit.

Picking Up Screws

Detailed steps on how to pick up screws using a screwdriver.

Service Instructions

Troubleshooting

Common problems, their probable causes, and solutions for the screw feeder.