Atlas Copco XAHS 950 CD7 T3 APP User Manual

- 52 -
Set for Remote Operation
Press the Settings View button
 scroll to 1000 GENERAL SETTINGS
 press Enter
 scroll to 1100 OPERATION MODE COMMAND
 Enter the OPERATION MODE COMMAND
menu
 Enter the SETTINGS parameter
 scroll to REMOTE
 press Enter.
Now the controller can only be started/stopped/
loaded by means of Remote Start/Stop/Load digital
inputs.
The start/stop/load buttons at the control panel will be
inactive, and if pressed the display will show:
To deactivate Remote Operation:
 Press the Settings View button
 scroll to 1000 GENERAL SETTINGS
 press Enter
 scroll to 1100 OPERATION MODE COMMAND
 press Enter
 go to parameter SETTINGS
 press Enter
 scroll to LOCAL
 press Enter.
Now press Back until you are in the Main View (or
the menu you require).
The Start/Stop/Load buttons at the control panel are
active.
0.0

Atlas Copco XAHS 950 CD7 T3 APP Specifications

General

Brand	Atlas Copco
Model	XAHS 950 CD7 T3 APP
Category	Air Compressor
Language	English