- 28 -
Locate the rear-end of the compressor upwind, away
from contaminated wind-streams and walls. Do not
obstruct air evacuation from the cooling system.
Avoid recirculation of exhaust air from the engine.
This causes overheating and engine power decrease.
TOWING INSTRUCTIONS
Label on towbar
For both non-adjustable - and adjustable towbar, the
towbar should be as level as possible and the
compressor and towing eye end in a level position.
Push the hand brake lever (1) completely downwards
and connect breakaway cable (2) to the vehicle.
Secure jockey wheel (3) or support leg in the highest
possible position (see figure). The jockey wheel is
prevented from turning.
Before towing the compressor, ensure
that the towing equipment of the vehicle
matches the towing eye or ball connector
and ensure that the service doors are
closed and locked properly.
To Next Page
Loading...
Need help?
General
