- 39 -
*
If you want to use another brand of oil,
consult the Engine Operation Manual.
**
It is strongly recommended to use Atlas
Copco branded lubrication oils for both
compressor and engine. If you want to
use another brand of oil, consult Atlas
Copco.
Never mix synthetic with mineral oil.
Remark:
When changing from mineral to
synthetic oil (or the other way around),
you will need to do an extra rinse:
After doing the complete change
procedure to synthetic oil, run the unit
for a few minutes to allow good and
complete circulation of the synthetic oil.
Then drain the synthetic oil again and
fill again with new synthetic oil. To set
correct oil levels, proceed as in normal
instruction.
Mineral compressor oil PAROIL M
Synthetic compressor oil PAROIL S
Mineral engine oil PAROIL E
Synthetic engine oil PAROIL E xtra
Liter US gal Order number
can 5 1.3 1615 5947 00
can 20 5.2 1615 5948 00
barrel 210 55 1615 5949 00
Liter US gal Order number
can 5 1.3 1630 0160 00
can 20 5.2 1630 0161 00
barrel 210 55 1630 0162 00
container 1000 264 1630 0163 00
Liter US gal Order number
can 5 1.3 1615 5953 00
can 20 5.2 1615 5954 00
barrel 210 55 1615 5955 00
container 1000 264 1630 0096 00
Liter US gal Order number
can 5 1.3 1630 0135 00
can 20 5.2 1630 0136 00