- 26 -
Maintenance
Use of Service Paks
Service Paks include all genuine parts needed for normal
maintenance of both compressor and engine. Service Paks
minimize downtime and keep your maintenance budget
low. You may order Service Paks from your local Atlas
Copco dealer.
Preventive Maintenance Schedule For
The Compressor
The schedule contains a summary of the maintenance
instructions.
Read the respective section before taking maintenance
measures.
When servicing, replace all disengaged packings, e.g.
gaskets, 0-rings, washers.
For engine maintenance refer to Engine Operation
Manual.
The maintenance schedule has to be seen as a guideline for
units operating in a duty environment typical to
compressor applications. Maintenance schedule can be
adapted depending on application environment and
quality of maintenance
MAINTENANCE SCHEDULE Daily Initially
Around 50 Hours
Normal
Or every 250 hours
1310 3004 30
Bi-yearly
Or every 500 hours
1310 3004 31
Yearly
or every 1000 hours
1310 3004 32
Note
Engine oil level Check
Compressor oil level Check
Air filter dust valve Empty
Fuel filter water drain Drain
Air intake vacuum indicator Check
Electrolyte level and terminals of battery Check Check Check Check
Tire pressure Check Check Check Check
Leaks in air-, oil- or fuel system Check Check Check Check
Oil cooler package Clean Clean Clean
Engine minimum and maximum speeds Check Check Check Check
Torque of wheel nuts Check Check Check Check
Brake system (if installed) Adjust / Check Adjust / Check Adjust / Check Adjust / Check
Safety valve Test
Door Hinges Grease Grease Grease
Towing eye shaft or ball coupling and its shaft Grease Grease Grease
Shut-down switches Check
Pressure drop over separator element (2) Measure Measure Replace
Fan v-belt (3) Adjust Adjust Adjust Adjust
Fuel tank Clean Clean Clean
Compressor oil Change
Compressor oil filter Replace Replace
Air filter element (1) Replace
Engine oil (3) Change Change Change Change
To Next Page
Loading...
