Atlas Copco XAS97 Dd - Conversion List of SI Units to British Units; Data Plate Information

34
XAS97 Dd
Design data
Compressor
1. Number of compression stages 1
Engine
1. Make KHD
2. Type F3M2011
3. Coolant Oil
4. Number of cylinders 3
5. Bore mm 94
6. Stroke mm 112
7. Swept volume l 2.332
8. Output according to ISO 9249 G
at normal shaft speed kW 36
– Load factor % 50
9. Capacity of oil sump:
– Initial fill l 8.5
– Refill (max.)
4)
l6
10. Capacity of cooling system l –
Unit
1. Capacity of compressor oil system l 8
2. Net capacity of air receiver l 16.7
3. Capacity of fuel tank l 80
4. Air volume at inlet grating (approx.)
3)
m
3
/s 1.2
Unit dimensions
without brakes towbar
fixed adjustable
Length mm 3,016 N.A.
Width mm 1,410 N.A.
Height mm 1,250 N.A.
Weight (ready to operate) kg 890 N.A.
with brakes towbar
fixed adjustable
Length mm 3,129 3,496/3,664
Width mm 1,410 1,410
Height mm 1,258 1,258
Weight (ready to operate) kg 925 940
1) At reference conditions, if applicable, and at normal shaft speed,
unless otherwise stated.
2) Data Measured according to Tolerance
Free air delivery ISO 1217 ed.3 +/- 5% 25 l/s <FAD<250 l/s
1996 annex D +/- 4% 250 l/s <FAD
The international standard ISO 1217 corresponds to following national standards:
- British BSI 1571 part 1
- German DIN 1945 Part 1
- Swedish SS-ISO 1217
- American ANSI PTC9
3) Air required for engine and compressor cooling, combustion and for compression.
4) with filter change
5) Coldstart: compressor oil DTE22 instead of DTE25
6) For Hose Reel application: maximum ambient temperature 30°C
8.4 C
ONVERSION LIST OF
SI
UNITS INTO
B
RITISH
UNITS
1 bar = 14.504 psi
1 g = 0.035 oz
1 kg = 2.205 lb
1 km/h = 0.621 mile/h
1 kW = 1.341 hp (UK and US)
1 l = 0.264 US gal
1 l = 0.220 Imp gal (UK)
1 l = 0.035 cu.ft
1 m = 3.281 ft
1 mm = 0.039 in
1 m
3
/min = 35.315 cfm
1 mbar = 0.401 in wc
1 N = 0.225 lbf
1 Nm = 0.738 lbf.ft
t °F = 32 + (1.8 x t °C)
t °C = (t °F - 32)/1.8
– A temperature difference of 1 °C = a temperature difference of 1.8 °F
9. DATA PLATE
1. Company code
2. Product code
3. Unit serial number
4. Name of manufacturer
5. EEC or national type approval number
6. Vehicle identification number
7. A Maximum permitted laden weight of the vehicle
B Maximum permitted road weight of the vehicle
C Maximum permitted laden weight of the towing eye
8. Model
9. Working pressure
10. Speed
11. Engine power
12. Manufacturing year
13. CE-mark in accordance with Machine Directive 89/392 EEC
14. Register number or number of notified body