Instruction Manual
2954 2510 03 39
3.4 Starting / Stopping
Safety precautions
Make sure the fuel tank is filled up.
Step Action
12. Attach the air line(s) to the closed air outlet valve(s). Connect the safety chain.
No external force may be applied to the air outlet valve(s), e.g. by pulling hoses
or by connecting equipment directly to the valve(s).
(DPar)
Do not disconnect power supply to control box in any way when the control
box is switched on. This will cause memory loss.
Do not switch off the circuit breaker when the control box is switched on. This
will cause memory loss.
When the compressor is put in operation for the first time and after running out
of fuel or changing the fuel filter, follow the specific start procedure, see
section 3.4.4 Specific start procedure.
To Next Page
Loading...
