- 26 -
TOWING INSTRUCTIONS WAGON
1. Attach the compressor to the towing vehicle.
2. Move hand brake lever (1) in the direction of the
arrow till stop and connect the breakaway chain
(2) to the towing vehicle.
Never move the compressor with air hoses connected
to the air outlet valves.
TOWBAR LEVELLING WAGON
The towbar of the wagon is equipped with an
adjustable spring loaded levelling device.
To adjust:
1. Slide back the rubber bellows (1).
2. Turn the nut (2) clockwise to increase the spring
load for lifting the towbar; turn the nut (2) counter
clockwise to decrease the spring load for lowering
the towbar.
3. Slide the bellows (1) over the nut.
LIFTING INSTRUCTIONS
To lift the compressor, use a lift truck or crane with
sufficient capacity (weight: see indication on
Dataplate).
See to it that the compressor will be lifted vertically
and remains level.
Before towing the compressor, ensure
that the towing equipment of the vehicle
matches the towing eye. The height of
the towing device of the vehicle must be
815 - 845 mm (31.8 - 33 in).
Before moving the compressor, switch it
off.
Lifting acceleration and retardation
must be kept within safe limits (max.
2xg).
Helicopter lifting is not allowed.
Lifting is not allowed when the unit is
running.
To Next Page
Loading...
Need help?
General
