Need help?Do you have a question about the Atlas Copco ZR 275 and is the answer not in the manual?
General| Model | ZR 275 |
|---|---|
| Type | Oil-free screw compressor |
| Flow Rate | 275 l/s |
| Working Pressure | 7.5 bar |
| Air delivery (FAD) | 275 l/s |
| Power | 22 kW |
Explanation of warning symbols used in the manual.
General safety guidelines for operation and maintenance.
Safety measures to be followed during the installation process.
Safety guidelines to ensure safe operation of the compressor.
Safety measures for performing maintenance and repair work.
Introduction to the Elektronikon regulator and its functions.
Operation and function of the emergency stop button.
Information on compressor protection functions and status.
Procedure for modifying various parameters.
Procedure for modifying protection settings like shutdown levels.
Procedure for modifying service settings, e.g., oil service life.
Procedure for modifying regulation parameters.
Procedure for modifying service settings, e.g., oil service life.
Introduction to the Elektronikon GraphicPlus controller and its functions.
Description and functions of the control panel elements.
Description of the main screen and its value views.
Function and procedure for accessing the service menu.
Procedure to display and reset protections.
Tuning of pressure bands and selection of current pressure band.
List of all shutdowns, causes, and status of counters/I-O at shutdown.
Safety precautions and general preparation for initial startup.
Checks to perform before starting the compressor, including oil level.
Step-by-step procedure for routine compressor starting.
Procedure for restarting the compressor after an emergency stop or shutdown.
Procedure for stopping the compressor normally and in emergencies.
Overview of regular checks and maintenance tasks.
Procedure for changing compressor oil and oil filters.
Troubleshooting guide for common compressor issues and remedies.
To Next Page