46 PennEngineering • www.pemnet.com
Instruction Manual - RIV938
FAULT DIAGNOSIS AND REPAIRS
REPAIRS
To ensure the operational efficiency and safety of the tool, all repair jobs shall be carried out exclusively by the local
authorized dealer or by the Technical Assistance Service of PennEngineering.
REQUESTING ASSISTANCE
For any information concerning Use, Maintenance, Installation, Repair etc., PennEngineering is at the Customer’s
full disposal for all enquiries.
When making inquiries, the customer is requested to be absolutely clear and to always refer to this Manual.
DISMANTLING INSTRUCTIONS
DISMANTLING INSTRUCTIONS
When disposing the tool you need to separate the plastic parts, which are to be disposed of in compliance with
current Regulations.
As for the bulk metal part of the tool, simply split-up the steel parts from those in other metals or alloys and send to
be melted down and recycled.
The oil drained from the tool must not be thrown outdoors but handed over to an authorized oil disposal center.
To Next Page
Loading...
Need help?
General
