If you wish to use your Atlas as a visual
altimeter, we suggest you use the hand
mount provided.
The finger webbing goes between the
back plate and the Atlas in its mount.
Then, use the screws provided to secure
the back plate to the mount (note: do
not over tighten). Finally, route the
strap through the opening of the finger
webbing as shown.
If you wish to wear your Atlas on your
wrist like a watch, use the wrist mount
provided.
The strap goes between the back plate
and the Atlas in its mount. Then, use
the screws provided to secure the back
plate to the mount (note: do not over
tighten).
Do not use the hand mount and wrist
mount together. Use one or the other.
To Next Page
Loading...
Need help?
General
