As an audible, Atlas is designed for mounting inside
the helmet – most modern skydiving helmet
designs have pockets in the liner on one or both
sides specifically for this purpose. Rounded edges
and corners incorporated into Atlas’ design are
intended to keep it comfortably fitted near the ear.
Insert Atlas into the helmet’s audible pocket with
the speaker hole facing inward (toward the ear).
Failure to do so may result in inaudible alarms.
Ensure that the speaker and pressure sensor holes
remain unobstructed by items such as adhesive
Velcro
TM
or tape. The foam liner of the helmet
should not interfere with either function.
To Next Page
Loading...
Need help?
General
