Altimaster Atlas is the next generation of digital skydiving instruments. It is
Micro-USB rechargeable, has an anodized machined aluminum case, a toughened
glass lens, raised buttons recessed into the case for protection, and is waterproof
for up to six feet for one hour. Atlas has eight selectable alarm groups and alarms
can be set as freefall or canopy alarms. Measurement units can be set
independently. The altitude can be displayed in feet or metres, the date can be
displayed in US or International format, the temperature can be displayed in °C
or °F, and the speed can be set mph or kmh. Atlas comes with all of the
accessories needed for a variety of mounting options.
Altimaster Atlas is manufactured exclusively by Alti-2, Incorporated.
This guide supports the most current version of Atlas firmware ONLY.
To check your Atlas's current firmware version, go to Menu > Demo Mode > Show
Screens. The second screen will show both the serial and version numbers. Be
sure to exit the demo by pressing the middle key until you see a screen that says
Demo Finished. Press any key to continue.
The current version of Atlas firmware is on our website.
Firmware Updates
Just as your personal computer programs are regularly updated, you should keep
your Atlas up to date. Not only will you get the latest features, but also regular
system updates that will help keep your Atlas running smoothly. Firmware updates
are always free.
Firmware updates are provided via the Neptune Maintenance Utility (NMU)
embedded in Paralog
®
. For Atlas firmware updates, visit
http://forum.altimaster.com and download the latest version of Paralog
®
-NMU.
To Next Page
Loading...
Need help?
General
