18
WARNING
NITROX (EAN) USE — M1 ONLY
IMPORTANT NOTICE - READ BEFORE YOU USE THIS REGULATOR
The M1 has been specially designed to handle high EAN mixes. The M1
may be used interchangeably with air or EAN mixes of up to 50% oxygen
concentration at 3500 psi maxiumum. It need not be dedicated for EAN
use, provided that it is used with air or EAN mixtures that meet minimum
dive industry purity standards.
The M1 may be used with up to 80% oxygen concentration at a maximum
pressure of 3000 psi, provided it is dedicated for this service and
kept in an oxygen clean condition. This is a special-use condition,
intended only for those persons trained and certified in the safe handling
of high pressure oxygen/oxygen mixtures. Oxygen cleaning requires a
more stringent level of cleanliness and special care should be taken to
keep the regulator in this condition.
To Next Page
Loading...