Atomic Aquatics T3 - Cold Water Use; DIN

To Next Page

To Previous Page

NITROX / COLD WATER USE / DIN

WARNING

COLD WATER USE

For diving in extreme cold waters below 50°F (10°C), we recommend

having the ﬁrst stage sealed with the installation of the optional anti-

freeze kit (standard in T3, T2x, ST1 & M1). This is a rubber sleeve that

ﬁts over the ambient chamber ports of the ﬁrst stage to prevent icing

of the ﬁrst stage. This is a factory or dealer installed item, as it requires

special tools and disassembly of the ﬁrst stage for ﬁlling of the chamber

with a special low temperature lubricant.

DIN CONNECTIONS

For use with cylinders having DIN style

valves (typically at pressures above 3000 psi),

a 300 BAR DIN connection is available.

It replaces the yoke connection and can

be ordered as standard from the factory or

as an option installed by the dealer.

T2x with DIN

Connection