OFF：turn off
master mode
back to
the pre-
vious
step.
W-En: wireless
pedal working
mode
ENTER
into the
next step
ON：turn on the
wireless foo-
tswitch working
mode
OFF：turn off
the wireless foo-
tswitch working
mode
ENTER:
confirm
and
back to
the pre-
vious
step.
TEST: texting
mode
ENTER to the testing mode
REST: restore
the factory ini-
tial setup
ENTER to restart the machine
NOTES：（1）S.01-S.99: program speed adjusting; S.01: the slowest, S.99: the fastest
（2）A point will be shown on the screen if there’s no operation in 30s.
（3）Machine address bit instruction, face to the LED screen, from left to right, the address is 1-
2-3-4.
（4）The nixie tube will twinkle when there’s no signal input to SLAVE,D001.
Atomic4Dj PLS4 Wireless – www.Atomic4Dj.com 11
To Next Page
Loading...
