EasyManua.ls Logo

ATOMRC Swordfish - Introduction; Specifications

ATOMRC Swordfish
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction/简
Specications/规
1
Wingspan/翼展: 1200mm
Length/⻓度: 810mm
WingArea/翼⾯积: 15.35d㎡
Servo/舵机: 9g Servo*4PCS
Material/材料: EPP
Recommend Motor/推荐电机: 2004~2306
Recommend ESC/推荐电调: BLS 30A 2~4S
Recommend Propeller/推荐螺旋桨: 7040-2
Recommend Weight/建议起⻜重量 1200g
Swordfish Specifications/
(Swordsh)款1200mm翼展V尾布局的中速FPV双发翔机,超⼤的V尾翼提⾼巡航时
载FPV⻜且便于安装维修的情况下,可能的减少机身的横截⾯积
线续航能⼒
使,优化了泡沫⻜机在使⽤过中的问题。从机翼快拆结构件、
、V尾线安装座、到航灯等注塑配件,在可能的减少⻜机体积的
便稳定结构
过程中机翼的抗扭钢性和机连接的结构强度、提⾼精准⻜⾏
对机身底部起到⼀定程度的护,可以在硬地⾯滑降
控+DJI天(模拟图传)+摄像头+GPS】1000g±200g 起⻜
FPV⻜了起⻜翼载荷均衡、巡航速均衡、装配维修便捷。
The swordsh is a 1200mm wing span middle speed twin motor glider, the large V-tail
improves the cruising speed stability, the aerodynamic shape and low cross-sectional
area reduce flight resistance and improve endurance.
We use lots of plastic injection parts to reduce the wight, size and also improved the
strength.
The fuselage and the wing are embedded with reinforced carbon tubes to maximize the
torsional rigidity of the wing during flight and the structural strength of the tail connection.
Improved the control of precise flight. The belly wheel and the tail skid design protect the
bottom of the fuselage from landing.
The glider support DJI air unit, also support analog system, the 1000g±200g take off weight
made the plane achieves balanced load on the take-off wing, balanced cruise speed, and
convenient assembly and maintenance.