ATOMRC Swordfish - RTH;RTH FPV Installation Guide

5
2
4
1
RTH/RTHFPVInstallation/安装指南
3
Install the INAV configurator then plug to PC
下载INAV地⾯站，安装接收机，连接地⾯站
Check INAV Configurator the receiver type,
then assign the channel and mode
连接INAV地⾯站，检查接收机设置、模式开关分配设置
检查舵机输出是否正确
Install the V-tail
将V尾与机身连接并⽤螺丝固定好
Installed the push rods.
先将Z拉杆安装到舵机摆臂上，再回中舵机安装摆臂