The engraving function requires LightBurn to control, please download the ocial version of the LightBurn software. LightBurn is third-pay
software, so the ATOMSTACK seice is not responsible for any loss caused by the operation of LightBurn, ATOMSTACK's rmware has been
tested in detail by ATOMSTACK, and incompatibility with software or hardware may still occur. If an error occurs due to incompatibility, you
can contact our customer seice depament for technical suppo.suppo@atomstack.com
Statement
Thisproductisnotatoyandisnotsuitableforpeopleunder15yearsofage.
Thisproductisaconveyor ,visit http://www.atomstack.com/ forcomplete"usermanual"andthelatestinstructionsandwarnings.AtomStack
reseestherighttoupdatethisDisclaimerandSafeOperationGuidelines.
Pleasebesuretoreadthisdocumentcarefullybeforeusingtheproducttounderstandyourlegalrights,responsibilitiesandsafetyinstruc-
tions;Otherwise,itmaybringpropeyloss,safetyaccidentandhiddendangerofpersonalsafety.Onceyouusethisproduct,youshallbe
deemedtohaveunderstood andacceptedalltermsandcontentsofthisdocument.Userundeakestoberesponsibleforhisorheractions
andallconsequencesarisingtherefrom.UseragreestousetheProductonlyforlegitimatepurposesandagreestoall termsandcontentsof
thisdocumentandanyrelevantpoliciesorguidelinesthatAtomStackmayestablish. You understand and agree that AtomStack may not be
able to provide you with the cause of the damage or accident and provide you with AtomStack’s after-sale seice unless you provide the
original engraving or cutting les, engraving software conguration parameters used, operating system information, video of the engraving or
cutting process, and operational steps prior to the occurrence of a problem or failure.
AtomStackisnotliableforanyandalllossesarisingfromtheuser'sfailuretousetheproductinaccordancewiththismanual.
AtomStackhastheultimaterighttointerpretthedocument,subjecttolegalcompliance.AtomStackreseestherighttoupdate,modify,or
terminatetheTermswithoutpriornotice.
02
Disclaimer