ATON AH66T - Sense Input Connections

To Next Page

To Previous Page

ATON AH66T INSTALLATION MANUAL

Sense Input Connections

The Sense Inputs of the AH66T are used to conditionally execute zone monitor power on

and off macros. The sensor is connected to the monitor and to the Sense Input

corresponding to the zone number. The ATON configuration software automatically creates

a macro that checks the status of the monitor prior to issuing the power command. This

prevents the TV from being inadvertently turned on or off when changing sources or

turning a zone on or off.

Figure 3-6: Sense Inputs

The AH66T provides +5 VDC to the TIP (VSNS) connection to power the Sensor. When the

Sensor is activated, it shorts the ring (SNS) to the sleeve (GND) thereby triggering the

AH66T’s Sense Input.

Available ELAN sensors include: AUDIO, VIDEO, CONTACT CLOSURE, VOLTAGE,

LED/LIGHT, and CURRENT/MAGNETIC FIELD sensors.