ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 31
IR Loop Connections
The IR Loop Connection allows IR commands received by the second AH66T chassis to be
transmitted to the main chassis.
Connect LOOP A of the second chassis to LOOP A of the main chassis and LOOP B of the
second chassis to LOOP B of the main chassis.
Figure 3-18: IR Loop Connections
You may use TIA/EIA 568A, TIA/EIA 568B or the A-Net wiring color code as shown on page
32 for the IR Loop Connections.
To Next Page
Loading...