ATON AH66T - Page 82

To Next Page

To Previous Page

ATON AH66T INSTALLATION MANUAL

Signal Strength

Description: Queries the signal strength of the currently tuned station.

Examples:

&AH66,R1,SIGNAL,?<cr> QUERIES (?) the SIGNAL STRENGTH (SIGNAL) of the

CHASSIS ONE (R1) radio’s currently tuned station

&AH66,R2,SIGNAL,?<cr> QUERIES (?) the SIGNAL STRENGTH (SIGNAL) of the

CHASSIS ONE (R1) radio’s currently tuned station

Example query responses: *AH66,R1,SIGNAL,66, *AH66T,R2,SIGNAL,87 where the

number is the signal strength.

Stereo / Mono Select Control

Description: Sets FM signal decoding to stereo or mono. Status can be queried.

Examples:

&AH66,R1,STEREO,ON<cr> Sets CHASSIS ONE’S (R1) radio FM DECODING MODE

(STEREO) to STEREO (ON).

&AH66,R2,STEREO,OFF<cr> Sets CHASSIS TWO’S (R2) radio FM DECODING

MODE (STEREO) to MONO (OFF).

&AH66,R1,STEREO,TOGGLE<cr> TOGGLES (TOGGLE) CHASSIS ONE’s (R1) radio FM

DECODING MODE (STEREO).

&AH66,R2,STEREO,?<cr> QUERIES (?) the FM DECODING MODE (STEREO) of

CHASSIS TWO’S (R2) radio.

Possible QUERY responses are:*AH66,R2,STEREO,OFF or *AH66,R2,STEREO,ON, where

OFF=MONO and ON=STEREO.

Prefix TS Parameter 1

Parameter 2

&AH66 R1/R2 SIGNAL ?

Prefix TS Parameter 1 Parameter 2

&AH66 R1/R2 STEREO ON/OFF/TOGGLE/?