Atracsys fusionTrack 500 - Wireless Related Options; Authentication Related Options

User manual
Version: v4.5.2
Name Type Description
Tracking time span int32,
read / write
Denes how many frames in the past the algo-
rithm will inspect in order to identify a raw data
associated to a marker.
New marker reco algo-
rithm
int32,
read / write
Toggles between the old marker reconstruction
algorithm (0) and the new one (1).
Distance matching toler-
ance
float32,
read / write
Denes the tolerance in mm between the mea-
sured and reference lengths dened by two du-
cials of a marker, during the marker matching
phase, when using the new marker reconstruc-
tion algorithm. If this option is changed when the
old algorithm is used, a warning is issued.
8.1.4 Wireless related options
This section presents the options related to the wireless markers.
Name Type Description
Enable pairing int32,
read-write
Toggles on / off the wireless marker search by the
fusionTrack device. This option is not compatible
with the ‘Marker button streaming’ and ‘Marker
battery streaming’ ones.
Marker reset int32,
write-only
Resets a wireless marker using its short ID.
Marker button stream-
ing
int32,
read / write
Toggles the periodic scanning of the wireless
button status and the its streaming in the
ftkFrameQuery::events member. If the ‘En-
able pairing’ option is enabled, the streaming is
disabled, whatever the value of this option.
Marker battery stream-
ing
int32,
read / write
Toggle the periodic scanning of the wireless
battery level and the its streaming in the
ftkFrameQuery::events member. If the ‘En-
able pairing’ option is enabled, the streaming is
disabled, whatever the value of this option.
Fire LED mask int32,
read / write
Set which wireless markers are red on each
frame. The options is a biteld, meaning that if
bit i is set to 1, marker with short ID i will be on.
Due to the maximum number of simulataneously
tracked wireless markers (which is 16), only the
16 LSB are used.
Active Wireless Markers
info
ftkBuffer,
read-only
Reads the information on paired markers, in CSV
format. The le contains a header explaining the
content. The eld separator is a comma ‘,’.
8.1.5 Authentication related options
This section presents the options related to the authentication mechanism, described in Chapter 16.
Atracsys / 2020-06-17 / 16:48:00 51 / 113