Need help?Do you have a question about the ATX 24 Type-S and is the answer not in the manual?
Introduces key features and technological advancements of the ATX boat.
Details the responsibilities of the owner and operator before, during, and after operation.
Details the terms, conditions, and coverage periods of the boat's limited warranty.
Covers warranty for finishes, including maintenance responsibilities and exclusions.
Lists items and conditions not covered by the limited warranty.
Emphasizes operator familiarity and adherence to safety rules to prevent accidents.
Lists critical warnings and instructions to prevent severe injury or death.
Outlines operator responsibilities for safe boat operation and passenger well-being.
Warns against overloading the boat, emphasizing capacity limits and weight distribution.
Details the extreme dangers and legal consequences of operating a boat under the influence.
Explains the function and importance of the emergency stop switch and lanyard.
Provides guidance on handling fire or explosion emergencies onboard.
Provides instructions for safely rescuing a person who has fallen overboard.
Stresses the importance of ventilation to prevent CO accumulation.
Emphasizes safety for skiers/riders and seeking certified training.
Warns against unsafe practices like "Teak/Drag Surfing" due to CO poisoning and propeller risks.
Provides essential safety guidelines for boat operators during watersports.
Lists safety precautions for skiers and riders, including equipment checks and PFD use.
Provides a code of conduct for safe and courteous participation in watersports.
Details the dangers of CO, its sources, and prevention measures.
Introduces fundamental nautical rules for preventing collisions.
Warns about collision risks and the necessity of following nautical rules.
Explains the rules of right-of-way for different vessel types and situations.
Describes the function of various switches, controls, and indicators on the boat.
Describes the emergency stop switch system, its function, and proper usage.
Provides an overview of the boat's control systems and their operation.
Explains the operation of the single-lever gearshift and throttle control.
Identifies and describes the function of various gauges on the dash panel.
Highlights critical safety warnings and proper usage of the tow pylon.
Continues safety warnings and proper usage guidelines for the tow pylon.
Lists essential checks to perform before starting the engine for safe boating.
Provides detailed instructions and safety warnings for refueling the boat.
Offers advice and practice methods for docking the boat safely.
Provides step-by-step instructions and safety precautions for starting the engine.
Explains how to use the TAPS system for wake shaping and performance optimization.
Discusses how TAPS settings affect ride, safety, and performance.
Explains the importance of proper load weight and distribution for boat performance.
Details techniques for steering, turning, and controlling the boat.
Provides guidelines for safely towing another boat.
Explains anchoring procedures, anchor types, and safety precautions.
Discusses achieving optimal performance through proper operation and setup.
Warns about hazards associated with fuels and flammable materials.
Highlights risks from improper maintenance of boat systems.
Warns about hazards from water system failures.
Details propeller function, selection, and importance for boat operation.
Details the components of the fuel system, including tank and fill locations.
Discusses ballast systems for wake enhancement and their control.
Continues discussion on ballast systems, capacity limits, and proper use.
Provides essential general maintenance tasks and safety precautions for the boat.
Details cleaning and care instructions for the boat's interior upholstery and materials.
Specific instructions for cleaning and caring for CoolTouch/Chil Cool™ vinyl interiors.
Emphasizes using quality products for exterior boat care to maintain its appearance.
Warns about hazards associated with cleaning agents and paints.
Details regular maintenance for gel coat, including washing, waxing, and scratch removal.
Explains gelcoat finish and general cleaning procedures for the deck and hull.
Recommends specific cleaners for deck and hull surfaces.
Details safety precautions and procedures for handling and servicing the propeller.
Provides essential safety warnings and procedures for battery maintenance.
Explains how to check the transmission oil level and the correct fluid to use.
Emphasizes periodic maintenance for steering systems to ensure safety and reliability.
Advises caution and professional repair for all electrical problems.
Explains the importance of preparing the boat for winter storage to prevent damage.
Continues winterization procedures, including ballast system draining and cleaning.
Outlines required maintenance tasks performed every 20 hours of operation.
Outlines required maintenance tasks performed every 70 hours of operation.
Outlines required maintenance tasks performed every 120 hours of operation.
Outlines required maintenance tasks performed every 170 hours of operation.
Outlines required maintenance tasks performed every 220 hours of operation.
Outlines required maintenance tasks performed every 270 hours of operation.
Outlines required maintenance tasks performed every 320 hours of operation.
Outlines required maintenance tasks performed every 500 hours of operation.
To Next Page
General