AU Gratina - Global Function; Area and PRL Settings

42
Making and Answering Calls
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
➡ Use a t
o select Set Functions and then press
c (Select).
➡ Use j t
o select Tone/Vib/Lamp and then press
c (Select).
➡ Use j t
o select Incoming Setup and then press
c (Select).
➡ Use j t
o select Incoming Call and then press
c (Select).
➡ Use j t
o select Volume and then press
c (Select).
➡ Use j t
o adjust the volume and then press
c (OK).
•Each press of j changes the volume one step.
STEP UP
The ring tone volume gradually increases.
5 (Deka)
(Loud)
～
1 (soft)
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Turning On the Answer Memo
When the standby screen is displayed, hold down
C for at least one second.
is displayed on the standby screen.
■ Turning Off the Answer Memo
When the standby screen is displayed, hold down
C for at least one second.
The answer memo is turned off and disappears from the
standby screen.
•The cell phone can record a maximum of ten
messages,
eachupto60secondslong.
•Answer memo is a function that automatically answers
calls and allows callers to recor
d messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.