Aube Technologies EConnect TA7210 - Advanced Setup and Support; Advanced Setup Options

Operating Manual
69-2473EF—01 18
Advanced setup
Setup functions Default setting Options
Temperature and time formats * °C °C / °F
24h 12h / 24h
Programmable mode (Horaire) ** On (Oui) On/Off (Oui/Non)
Adaptive Intelligent Recovery (Horaire
Anticipé) ***
On (Oui) On/Off (Oui/Non)
* You can set the temperature display unit in °C or °F. You can set the time display
format in 12-hour or 24-hour (military time) if the thermostat is in programmable
mode.
** Accessible only if you use the thermostat in programmable mode.
When Adaptive Intelligent Recovery is on, the thermostat “learns” how long your
heater takes to reach the set temperature. The thermostat will then determine when
to activate heating so the desired temperature is attained at the desired time. The
thermostat re-assesses the heating start time daily based on the previous day’s
performance. When Adaptive Intelligent Recovery is off, heating starts at the set time.
*** Leave at On to use the thermostat in programmable mode. Place at Off to use the
thermostat in nonprogrammable mode.