Why Aube Technologies TH104PLUS Thermostat displays wrong temperature?
If the Aube Technologies Thermostat displays the wrong temperature, correct the following conditions: ensure that the thermostat isn't exposed to air drafts; check that the sticker on the thermostat's screen has been removed; verify that the thermostat isn't located near or above a heat source, such as a light dimmer.
How to fix Aube Technologies TH104PLUS Thermostat temperature schedule?
If the Aube Technologies Thermostat doesn't change temperature according to the programmed schedule: * Make sure the thermostat is in Automatic mode. * Check the clock and the schedule. If the thermostat is configured for 12-hour format, make sure that PM appears on the screen when afternoon times are displayed.
Why Aube Technologies Thermostat housing is hot?
It is normal for the Aube Technologies Thermostat's housing to get hot. When the thermostat is running at full capacity, its housing can reach 40 °C (104 °F).
Why Aube Technologies TH104PLUS displays wrong time?
The Aube Technologies Thermostat displays the wrong time if it was without power for more than 5 hours.
General| Type | Programmable Thermostat |
|---|---|
| Display | LCD |
| Programmable | Yes |
| Backup Battery | No |
| Color | White |
| Application | Heating and Cooling |
| Temperature Range | 5°C to 30°C |
| Temperature Control Accuracy | ±0.5°C (±1°F) |
| Number of Programs | 4 per day |
| Load | 1.5A |
Displays current time and day information.
Shows room temperature and setpoint temperature.
Displays mode, period, and heating intensity.
Diagram showing thermostat wiring for 2-wire setup.
Diagram showing thermostat wiring for 4-wire setup.
Securing the thermostat to the electrical box with screws.
Crucial safety advice to keep air vents clear.
How to temporarily change setpoint in Auto mode.
Steps to adjust the programmed heating schedule.
Table listing parameters like temperature unit, time format, fan, away temperature.
Detailed explanations for fan, away temperature, DST, early start, and keypad lock.
Solutions for when the displayed temperature is wrong.
Troubleshooting temperature changes not matching the schedule.
Addresses blank screen issues and the LP indicator.
Solutions for when thermostat settings cannot be changed.
Details on supply voltage, load limits, temperature ranges, and resolution.
Provides address, phone number, and email for customer support.
To Next Page
