EasyManua.ls Logo

Aube Technologies TH115 - Technical Specifications; Product Specifications and Data Protection

Aube Technologies TH115
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s Guide
22
ENGLISH
Maximum load: 0.5 A / 24 VAC
Wire gauge: 14 to 22 AWG
Heating cycle length: 15 seconds
Display range: 0°C to 70.0°C (32°F to 158°F)
Ambient setpoint range (A/AF modes): 5.0°C to 30.0°C (40°F - 86°F)
Floor setpoint range (F mode): 5.0°C to 40.0°C (40°F - 104°F)
Floor limit range (AF mode): 5.0°C to 40.0°C (40°F - 104°F)
Resolution: 0.5°C (1°F)
Data protection: In the event of a power failure, most settings are saved. However the time
and Daylight Saving Time must be set if the power failure lasts more than 6 hours. The
thermostat will return to the mode that was active prior to the power failure.
Technical Specifications
69-2618EFS-01 (5 x 3.125).book Page 22 Thursday, November 21, 2013 2:00 PM

Table of Contents

Other manuals for Aube Technologies TH115

Related product manuals