Need help?Do you have a question about the Aube Technologies TH115 and is the answer not in the manual?
General| Brand | Aube Technologies |
|---|---|
| Model | TH115 |
| Category | Thermostat |
| Language | English |
Key guidelines for installation location, relay compatibility, and general safety before operating the thermostat.
Explains A mode (ambient air), F mode (floor temp), and AF mode (ambient and floor temp) control.
Lists the components included with the thermostat: thermostat unit, screws, anchors, floor sensor, screwdriver.
Identifies and explains the function of each button: On/Off, Day, Hour, Minutes, Program, Clear, Mode/Ret, Preset temp, Backlight, Temp adjustment.
Details the meaning of displayed items: Time, Day, Temperature, Operation mode icons, number of flames, period, and preset icons.
Step-by-step guide: turn off power, remove faceplate, wire thermostat, connect sensor, install wallplate, set switches, reattach faceplate, apply power.
Connect sensor between R and S terminals. Route wires carefully and position between heating wires for best control. Do not staple sensor head.
Guide for setting display format (F/C, 12/24h), Early Start (Enable/Disable), and Temperature control mode (F, AF, A).
Instructions to set the hour, minutes, and day using the Hour, Min, and Day buttons, returning to normal display with Mode/Ret.
Procedure to enable/disable DST and set the current year, month, and date using the Day and arrow buttons.
Steps to set minimum (FL:LO) and maximum (FL:HI) floor temperature limits by turning the thermostat Off/On and using adjustment buttons.
Explains how to use preset temperatures (Comfort, Economy, Vacation) by pressing buttons and how to modify them by pressing and holding.
Describes the 4-period daily schedule, Comfort/Economy settings, and options for skipping periods or using only two periods.
Guide to program periods for each day, set start times, or skip periods using Pgm, Day, Hour, Min, and Clear buttons.
Explains how to activate Automatic mode where the thermostat follows the programmed schedule by pressing Mode/Ret.
Describes how to temporarily change the setpoint temperature, which lasts until the next scheduled period.
Explains how to switch to Manual mode for a permanent temperature setting, bypassing the programmed schedule.
Details how to activate Vacation mode, which uses the pre-set vacation temperature by pressing the vacation icon button.
Explains common error messages like LO (low temp), HI (high temp), and Er (connection error) and their implications.
Details electrical specs, ranges, resolution, and how settings are preserved during power failures.
Covers the 3-year warranty, conditions for repair/replacement, and exclusions like installation costs.
States Honeywell's limited liability and clarifies that express warranties are limited to the stated duration, excluding implied warranties.
To Next Page
