Owner’s Guide
9
ENGLISH
- Supply: 120/240 VAC, 50/60 Hz
- Minimum load: 0.83 A (resistive only)
200 W @ 240 VAC
100 W @ 120 VAC
- Maximum load: 10.4 A (resistive only)
2500 W @ 240 VAC
1250 W @ 120 VAC
- Display range: 0°C to 50°C (32°F to 122°F)
- Setpoint range: 5°C to 30°C (40°F to 85°F)
- Storage: -20°C to 50°C (-4°F to 120°F)
- Heating cycle length: 15 seconds / 5 minutes (user-selectable)
- Permanent memory: You do not need to adjust the temperature following a power outage.
Specifications
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 9 Thursday, July 9, 2009 2:24 PM
To Next Page
Loading...
Need help?
General
